A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand

Authors

  • Candassamy K Thanthai Periyar Government Institute of Technology, Anna University, Vellore (India)
  • Sreerambabu J Thanthai Periyar Government Institute of Technology, Anna University, Vellore (India)
  • Sasikumar P Kumaraguru College of Technology, Anna University, Coimbatore (India)

DOI:

https://doi.org/10.7764/RDLC.23.1.129

Keywords:

polymer concrete, linear regression analysis, strength properties, R-sand, M-sand.

Abstract

Numerous research studies have concentrated on advancing a sustainable construction industry through innovative concrete methods and materials. In this context, the present research specifically investigates polymer concrete, utilizing both River sand (R-sand) and Manufacturing sand (M-sand). The polymer content was incorporated into the concrete mix based on the weight of the cement, with varying percentages specifically 2%, 4%, 5%, 6%, and 8%. A slump cone test was conducted to assess the workability of the polymer concrete. Based on experimental studies, the optimal polymer percentage was determined to be 5%. This optimal dosage of polymer content significantly improved the mechanical properties of the polymer concrete. The Compressive Strength (CS), Split Tensile Strength (STS), Flexural Strength (FS), and Modulus of Elasticity (ME) were evaluated at both 7 and 28 days. When using R-sand, the mechanical properties of CS, STS, and FS increased by 13.65%, 12.20%, and 11.42%, respectively. Conversely, employing M-sand led to even greater improvements in strength properties: 19.18% for CS, 12.54% for STS, and 11.67% for FS. Based on the experimental results, the strength properties of polymer concrete M-sand mixes outperformed the R-sand mixes. Linear regression analysis and various codes were employed to predict the strength properties of CS, STS, FS and ME. The regression analysis and various codes successfully forecasted the strength properties of polymer concrete, with the predicted results closely correlated with the experimental results. Based on experimental investigations, the determined mix proportions are recommended for practical applications in various environmental conditions.Numerous research studies have concentrated on advancing a sustainable construction industry through innovative concrete methods and materials. In this context, the present research specifically investigates polymer concrete, utilizing both River sand (R-sand) and Manufacturing sand (M-sand). The polymer content was incorporated into the concrete mix based on the weight of the cement, with varying percentages specifically 2%, 4%, 5%, 6%, and 8%. A slump cone test was conducted to assess the workability of the polymer concrete. Based on experimental studies, the optimal polymer percentage was determined to be 5%. This optimal dosage of polymer content significantly improved the mechanical properties of the polymer concrete. The Compressive Strength (CS), Split Tensile Strength (STS), Flexural Strength (FS), and Modulus of Elasticity (ME) were evaluated at both 7 and 28 days. When using R-sand, the mechanical properties of CS, STS, and FS increased by 13.65%, 12.20%, and 11.42%, respectively. Conversely, employing M-sand led to even greater improvements in strength properties: 19.18% for CS, 12.54% for STS, and 11.67% for FS. Based on the experimental results, the strength properties of polymer concrete M-sand mixes outperformed the R-sand mixes. Linear regression analysis and various codes were employed to predict the strength properties of CS, STS, FS and ME. The regression analysis and various codes successfully forecasted the strength properties of polymer concrete, with the predicted results closely correlated with the experimental results. Based on experimental investigations, the determined mix proportions are recommended for practical applications in various environmental conditions.

Downloads

Download data is not yet available.

References

ACI 318-08, Committee; American Concrete Institute. Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary; American Concrete Institute: Farmington Hills, MI, USA, 2007.

Aggarwal, L.K., Thapliyal, P.C., & Karade, S.R. (2007). Properties of polymer-modified mortars using epoxy and acrylic emulsions. Construction and Building Materials, 21(2), 379-383.

Bărbuţă, M., Harja, M., & Baran, I. (2010). Comparison of mechanical properties for polymer concrete with different types of filler. Journal of Materials in Civil Engineering, 22(7), 696-701.

Du Beton, C.E.-I, CEB-FIP Model Code 2010; CEB-FIP: Lausanne, Switzerland, 2012.

Fowler, D.W. (1999). Polymers in concrete: a vision for the 21st century. Cement and concrete composites, 21(5-6), 449-452.

Garbacz, A., & Sokołowska, J.J. (2013). Concrete-like polymer composites with fly ashes–Comparative study. Construction and building materials, 38, 689-699.

GB 50010 – 2010, Chinese Standard Code for Design of Concrete Structures. MOHURD: Beijing, China, 2015.

Golestaneh, M., Amini, G., Najafpour, G.D., & Beygi, M.A. (2010). Evaluation of mechanical strength of epoxy polymer concrete with silica powder as filler. World Applied Sciences Journal, 9(2), 216-220.

Gorninski, J.P., Dal Molin, D.C., & Kazmierczak, C.S. (2004). Study of the modulus of elasticity of polymer concrete compounds and comparative as-sessment of polymer concrete and portland cement concrete. Cement and concrete research, 34(11), 2091-2095.

Iravani, S. Mechanical Properties of High-Performance Concrete; American Concrete Institute /ACI Special Publication: Farmington Hills, MI, USA, 2010; Volume SP-128, 416–426.

IS 10262 – 2019, Concrete Mix Proportioning Guidelines, Bureau of Indian Standards: New Delhi, India, 2019.

IS 383 – 2016, Coarse and Fine Aggregate for Concrete Specification, Bureau of Indian Standards: New Delhi, India, 2016.

IS 456 - 2000; Plain Concrete and Reinforced, Bureau of Indian Standards: New Delhi, India, 2000.

IS 516 – 1959, Method of Tests for Strength of Concrete. Bureau of Indian Standards: New Delhi, India, 1959.

IS 8113-2013, Ordinary Portland Cement 43 Grade Specification, Bureau of Indian Standards: New Delhi, India, 2013.

Jiang, C., Fan, K., Wu, F., & Chen, D. (2014). Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete. Materials & Design, 58, 187-193.

Lokuge, W.P., & Aravinthan, T. (2013). January. Mechanical properties of polymer concrete with different types of resin. In Proceedings of the 22nd Australasian Conference on the Mechanics of Structures and Materials (ACMSM 22). University of Southern Queensland.

Mandel, J.A., & Said, S. (1990). Effect of the addition of an acrylic polymer on the mechanical properties of mortar. Materials Journal, 87(1), 54-61.

Mebarkia, S., & Vipulanandan, C. (1995). Mechanical properties and water diffusion in polyester polymer concrete. Journal of engineering mechanics, 121(12), 1359-1365.

Mohr, B.J., Biernacki, J.J., & Kurtis, K.E. (2007). Supplementary cementitious materials for mitigating degradation of kraft pulp fiber-cement composites. Cement and Concrete Research, 37(11), 1531-1543.

Muthukumar, M., & Mohan, D. (2004). Studies on polymer concretes based on optimized aggregate mix proportion. European polymer journal, 40(9), 2167-2177.

Muthukumar, M., & Mohan, D. (2004). Studies on polymer concretes based on optimized aggregate mix proportion. European polymer journal, 40(9), 2167-2177.

Noruzman, B. (2019). AH Performance of Polymer Modified Concrete Incorporating Polyvinyl Acetate Waste (Doctoral dissertation, Ph. D. Thesis, Uni-versiti Teknologi Malaysia, Johor, Malaysia).

Nş, A., & Bilenler Altundal, M., (2023). Durability performance of alkali-activated concretes exposed to sulfuric acid attack. Revista de la construcción, 22(1), 16-35.

Rebeiz, K.S., Serhal, S.P., & Fowler, D.W. (1995). Shear strength of reinforced polyester concrete using recycled PET. Journal of structural Engineering, 121(9), 1370-1375.

Sasikumar, P. (2023). A comparative study between buckling behaviour and statistical analysis of axially loaded fully encased composite columns made with high strength concrete. Revista de la construcción, 22(3), 694-706.

Sasikumar, P. (2024). Experimental study on the fully encased composite short columns made with high-strength fibre-reinforced concrete. Asian Journal of Civil Engineering, 25(2), 1-12.

Sasikumar, P., & Manju, R. (2022). Performance of high strength concrete encased steel composite columns. Revista Romana de Materiale, 52(4), 374-384.

Sasikumar, P., & Manju, R. (2022a). Structural behaviour of high strength concrete columns reinforced with glass fibre reinforced polymer bars under axial loading. Revista Romana de Materiale, 52(4), 412-423.

Sasikumar, P., & Manju, R. (2023). Structural behavior of axially loaded high strength concrete columns reinforced longitudinally with glass fiber rein-forced polymer bars. Revista de la construcción, 22(2), 293-305.

Sasikumar, P., & Manju, R. (2024) Flexural behaviour of reinforced concrete beams reinforced with Glass Fibre Reinforced Polymer (GFRP) bars: experi-mental and analytical study. Asian Journal of Civil Engineering, 25(2), 1-14.

Sasikumar, P., Nandhakumar, P., & Manju, R. (2022). An experimental work on high strength concrete with addition of sisal fibre. In AIP Conference Proceedings, 2446(1).

Sivakumar, M.V.N. (2011). Effect of polymer modification on mechanical and structural properties of concrete–an experimental investigation. Interna-tional Journal of Civil & Structural Engineering, 1(4), 732-740.

Soroushian, P., & Bayasi, Z. (1991). Fiber type effects on the performance of steel fiber reinforced concrete. Materials Journal, 88(2), 129-134.

Thomas, J., & Ramaswamy, A. (2007). Mechanical properties of steel fiber-reinforced concrete. Journal of materials in civil engineering, 19(5), 385-392.

Varughese, K.T., & Chaturvedi, B.K. (1996). Fly ash as fine aggregate in polyester based polymer concrete. Cement and Concrete Composites, 18(2), 105-108.

Vipulanandan, C., & Paul, E. (1993). Characterization of polyester polymer and polymer concrete. Journal of Materials in Civil Engineering, 5(1), 62-82.

Yamada, T. (1986). Japan Congress on Materials Research, 29th, Tokyo, Japan, October 1985, Proceedings.

Zhou, J., Su, Z., Hosseini, S., Tian, Q., Lu, Y., Luo, H., Xu, X., Chen, C., & Huang, J. (2024). Decision tree models for the estimation of geo-polymer con-crete compressive strength. Mathematical Biosciences and Engineering, 21(1), 1413-1444.

Downloads

Published

2024-04-29

How to Cite

K, C., J, S. ., & P, S. . (2024). A comparative study between linear regression analysis and various codes for predicting the mechanical characteristics of poly-mer concrete using R-sand and M-sand. Revista De La Construcción. Journal of Construction, 23(1), 129–150. https://doi.org/10.7764/RDLC.23.1.129